Windows 7 System Recovery Disc Iso Download

Believe it or not, my old desktop computer doesn’t have an internal CD/DVD drive. I found that it is unnecessary because the 5.25″ DVD drive is too big and takes up too much space. Removing it gives more space for air ventilation. Secondly, although a DVD drive doesn’t take up much power, I know I am saving some (around 20 Watts) from not having it. I do have an external USB slim DVD writer though if I really need to use it. Everything can be run from USB nowadays such as Hiren’s BootCD, antivirus rescue discs and even installing Windows 7.

I have also started using the Windows 7 system image backup and restore feature, so there is no need to create a Windows 7 Rescue Disc in case the boot loader gets wiped off. However, seeing that I’ve already removed the internal DVD drive and try to avoid plugging and unplugging the USB slim DVD writer, I need to install the Windows 7 system recovery onto a USB flash drive. There is no easy supported method to do that from Windows itself but here are a few ways we’ve found how to do it.

To create a system repair disc. Open Backup and Restore by clicking the Start button, clicking Control Panel, clicking System and Maintenance, and then clicking Backup and Restore. In the left pane, click Create a system repair disc, and then follow the steps. If you're prompted for an administrator password or confirmation, type the password. Create a Windows 7 System Repair Disc — MAXIMUMpcguides – Windows 7 tips, tricks, help, and how-to guides - mentions downloads but no URL to download sites Download Windows 7 System Recovery Discs - point to neosmart site which has recovery images but they are for a fee. Download Windows 10 Disc Image (ISO File) Before updating, please refer to the Windows release information status for known issues to confirm your device is not impacted.

There are other options to get the recovery files on to USB such as using the Command Prompt with Diskpart or using USB bootable creation tools such as SARDU, UNetbootin, Rufus, xboot etc, but after testing we found that not all the recovery USB functions work properly. Out of the 5 recovery tools on the “System Recovery options” menu, only the last option “Command Prompt” is working while the rest are broken.

Clicking on Startup Repair shows the following error:

Startup Repair cannot repair this computer automatically.
Sending more information can help Microsoft create solutions.

Clicking on System Restore shows the following error:

To use System Restore, you must specify which Windows installation to restore.
Restart this computer, select an operating system, and then select System Restore.

Clicking on System Image Recovery shows the following error:

An internal error occurred. The following information might help you to resolve the error:
The system cannot find the file specified. (0x80070002)

Clicking any of the 2 options in Windows Memory Diagnostic shows the following error:

Windows cannot check for memory problems.
An error is preventing Windows from checking for memory problems during startup. To run the Windows Memory Diagnostic manually, boot the computer from the Windows installation disc, and then select Windows Memory Diagnostic from the Windows Boot Manager menu.

If you are getting any of the error messages above on your current Windows 7 System Recovery image installed onto USB stick, or want to create a fully working recovery USB from the off, you should use the below methods to create it as we have found that all the recovery option functions work as intended.

Windows 7 Recovery Iso

Step One: Creating the Windows Recovery ISO

Before you create the recovery USB stick, you must first get yourself a standard Windows 7 System Recovery ISO which can be attained in two ways. One if you have a recovery CD already burned to disc, and the second if you have no access to an optical drive. If you have a CD-RW drive the easiest method is to run the recdisc.exe tool from the Search box in the Start menu, burn the image to a re-writable CD and then follow the first method below.

First Method: From an existing Windows 7 system recovery disc.

1. Download and install the trial version of PowerISO. If you have any other software you like that creates an ISO file from a CD such as ImgBurn etc, you can use that also. Watch out for the adware during the PowerISO install.

2. Start PowerISO, then go to the Tools menu -> “Make CD/DVD/BD Image File”.

3. Select the destination file as “.iso file”, then choose a location and filename for the saved file. Make sure the source drive is the correct one. Press OK when you’re ready to create.

After a minute or two, the ISO will be created ready to put onto USB.

Here’s how to create the image using another popular ISO utility called UltraISO instead if you prefer it over PowerISO:

1a. Download and install the trial of UltraISO.

2a. Start UltraISO (right click and Run as Administrator), go to Tools menu -> “Make CD/DVD Image or press F8.

3a. Click the button to choose a location and filename for the output file, make sure the drive is selected that contains your disc, then click Make. The ISO Output Format should be selected by default.

On Page 2 we’ll show you how to get the Recovery ISO from a system without an optical drive and write the ISO to USB.

12Next › View All

You might also like:

How To Make a Windows XP Install Disc That Includes DriversCreate a Self Running Executable to Auto Burn ISO Files to DiscHow To Make a USB Flash Drive BootableHow to Repair Windows 7, 8 or Vista Without the Install DVD10 Tools To Install Windows Faster Using a USB Flash Drive

When I switch on my netbook it says “windows failed to start a recent hardware or software change might be the cause”

Reply
Vince McNeil2 years ago

Thanks for sharing this information on windows 7 recovery disk

Reply

That article is nice but it doesn’t clarify why Recovery Tools fails such as “Windows cannot check for memory problems” from Windows Memory Diagnostic Tool. I have created a Windows 7 installation DVD from official iso and running Windows Memory Diagnostic from this DVD shows error that it cannot check. My current OS is not Windows 7 but Xp. What is the reason of this failure?

Reply
HAL9000 Author3 years ago

The problem you are having is different from the problems listed here. Windows 7 install/recovery simply doesn’t handle booting or installing from USB too well, which is why these listed errors crop up.

Reply

Method 2 (TotalMounter)
D is a real hard disk. I-virtual laser. Question: in window 3 D written correctly in the path? Or in window 3 it is necessary to write a laser disk I?
Tanks

Reply
Vineet Garg4 years ago

Hi All, Good tutorial, but this is how i will manage with a limited no. of pen drives 1. i would make two multiboot pen drives with several windows installation isos & utilities on them : one with YUMI ( BIOS ) & the other one with SARDU ( UEFI ). 2. For repairing/troubleshooting purposes, i would use these multiboot pen drives but, for installation purposes, i would always make temporary RUFUS pendrive .3. When required, i will use multiboot pendrives to boot into the particular windows installation media & make the use of ”repair my computer” as system repair disc. 4. i would use ImageUSB by Passmark to backup & restore various pendrive images. 5. & All of that is very well mentioned/discussed/described on this great platform RAYMOND CC ! Thanks & Regards.

Reply

1. Excellent tutorial!

2. Easy2Boot (E2B) is an excellent alternative to PowerISO and UltraISO; I recommend that you ad it to your tutorial.

Reply
rae4 years ago

Method 2 worked for me. Thanks a lot!
Just wondering if I can still use the usb to store other files in it? Thanks again.

Reply

Thank you so much this information helped me a lot Big Thanks

Reply
Kissit McEffyuu5 years ago

Great information… seeing how all the recovery iso files for win7 are 600mb, and the trial version of the iso programs only support 300.

get that money.

Reply

I really don’t know where you get the idea that the repair disk ISO from Windows 7 is 600MB but it is totally wrong.

The Windows 7 32-bit ISO is 143MB, the 64-bit ISO is 166MB, it even tells you in the article the size of the ISOs if you read. Each easily fits within the 300MB limit imposed by the trial versions of the software used in the article, no need to pay a dime for anything.

Reply
dipal patel6 years ago

i am also facing the same problem as srikant is facing i have 3 recovery dvds and as u sugested above yumi is not working for me can u help me out each and every dvd contain a data.bin file with same name as data.bin i am have a hp notebook pavilion dv4 3016tx

Reply

how do i fix my computer with boot mgr compress or missig with a usb flash drive

Reply
Gsgameiro6 years ago

Thank you so much this informtion helped me a lot!!!!!!!!!!!!!!!!!!!!! Big Thanks

Reply

Very slick! Thank you!

Reply
Sina6 years ago

Thanks :)

Reply

I have a bootable usb rescue disc. Unfortunately when I select restore from image, I get an error message as follows:

To restore this computer, Windows needs to format the drive that the Windows Recovery Environment is currently running on. To continue with the restore, shut down this computer and boot it from a Windows Installation disc or a system repair disc and then tyr the restore again.

This doesn’t make sense as the drive where windows will be restored is blank. The only way I found to restore was to actually create the system rescue disc and boot from the dvd drive.

Frustrating experience I thought the CD/DVD went away but I suppose windows 7 is the last technology dependant on that era. The DVD is dead, long live the DVD.

Reply
srikanth6 years ago

What should I do if I have multiple recovery dvd’s .I mean how to copy all into a pendrive

Reply

Something like YUMI might be able to do that for you.

https://www.raymond.cc/blog/how-to-install-windows-7-faster-using-usb-flash-drive/2/

Reply
olivier6 years ago

Thanks a lot for your tutorial..
I was’nt able to create a w7 rescue disk on my dvd writer. Driver problem maybe ? But I still can burn iso using other software ( BurnCDCC for example) .
microsoft advice was to replace my dvd writer. Very kind to them…

Reply

Extremely helpful information, especially the total mounter utility. I wasted days trying to solve recovery disk issue (drive not ready error / parameter incorrect). Thanks ton!

Reply
Dr. Ion7 years ago

Most any USB drive method will work for Win 7 as long as you remove the USB flash drive just before the reimaging process starts. Let it find the image and click next. Then remove the flash drive. Once it is restored it will reboot. I downloaded a Win 7 iso from Digital River and used the Microsoft Windows 7 DVD Tool to make mine, but I tried many methods from tutorials and most work if you unplug them as I’ve described. Any repair disk on a DVD will work as a source for needed files as well (You just need to get a decent tutorial onlie for making the USB bootable.

Reply

The instructions worked fine, but now my pen drive isn’t accessible – it gives an error saying it’s corrupted and unreadable. Is that expected?

Reply
HAL9000 Author7 years ago

No, that’s not normal, something has gone badly wrong during the process as the pen drive should be readable. Try from the beginning again…

Reply

The USB flash drive needs to be clean?

Reply
HAL9000 Author8 years ago

It doesn’t have to be clean as any data currently on the flash drive will be overwritten. Doesn’t hurt to format the drive first yourself though.

Reply

Great work! Thanks a lot. After a long time trial and error I found your tutorial that works on creating a bootable USB-stick containing W7 rescue DVD.

Reply
Heather9 years ago

Thanks so much for this guide! It saved my system today when I had a partitioning disaster.

Thankfully, I found your site and followed your instructions to create a Windows 7 system recovery usb before I attempted partitioning my netbook’s hard drive.

Reply

This needs to be a bookmark for all Windows 7 users everywhere. 2 years one, and still incredibly relevant. Many thanks to you, man; using Method 2, I got myself a repair disk without having to get a CD burner.

Reply
Brianoh389 years ago

Many thanks. Method 2 worked for me. You’re a genius (compared to me). Why don’t Microsoft provide basic support information to their users?

Reply

great article.. it helped me a lot..
thank you very much

Reply
Markus10 years ago

Hi. Great article and it worked fine.

Reply

Thanks for the instructions.

Reply
Tman11 years ago

Thanks for the info. You saved the day.

Windows 7 Recovery Cd Iso

Reply

This is good!

Reply
RT11 years ago

Thanks for the tip! The flash drive seems to boot up.

Reply

thanks buddy…
every time i use software for creating pendrive bootable.
this information is helpful.
thanks again

Reply
kietbull11 years ago

Thanks buddy!

Reply

Windows 7 System Recovery Disc Iso Download Windows 10

Nice One Ray, good clear instructions :)

Reply

Windows 7 Recovery Disc Iso

Disc
INDRANIL11 years ago

Thanks Raymond. Nice info ;).

Reply

this one is much better than the cd.
thanks for the tutorial.

Reply
INDRANIL11 years ago

Nice info. Keep it up.

Reply

Wow…nice and very useful as always…thanks

Reply
derek11 years ago

A good tip,especially if you have a netbook.

Reply

Leave a Reply